| Blasting Equipments >>
Accessories |
 |
| The Venturi suction system allows high velocity air
pressure to pass over the abrasive feeder line, which sucks the abrasive
through the smaller hose and combines it with air pressure at the back of a
nozzle. The gun nozzle is a tapered smaller orifice that speeds up the combined
flow and sprays out the abrasive in a relatively narrow or fixed pattern of
discharge. The SLV Series Nozzles are our latest design of high production
blast nozzles. These nozzles are manufactured with a one-piece sintered
tungsten carbide liner for extended production life. The liner also allows for
slow and even wear throughout the life of the nozzle. A new combination of
aluminum and polyurethane adds proven advantages in weight balance, strength
and shock absorbent features not found in metal cased nozzles. The long venture
design will maximize production requirements as well as give added abrasive
impact when needed for tough, hard to clean surfaces |
|
 |
|
| Blast Ing Nozzle Holders |
 |
|
| Remote Control Valve And Dead Man Handle |
|
| It is require a remote control system on
all abrasive blasting equipment. Our pneumatic remote an controls are
considered to be the most reliable, dependable, and safest available in the
industry. Safety is always the most important factor, especially today when you
consider the high cost of workman's compensation and liability insurance. The
pneumatic remote control is a 3-way normally closed valve, unlike a bleeder
type that can cause accidental start-up. |
|
 |
|
| Grit / Sand Valves |
|
|
Grit metering valves are coming in all standard sizes which is capable for
handling all type of abrasives. |
|
 |
|
| Pop-Up-Valves |
|
| Our Pop-up Valves, Stems and rubber
Sealing Rings are really suit for all most all blast pots in the market.
|
|
 |
|
| Protective Clothing
|
|
| We offer you all the required protective
clothing for blasting. We have in stock, suits, cape and gloves.
Blaster's Gloves
Slit Type – For comfort and ease of movement. Made from
abrasion-resistant tanned leather with reinforced crotch for durability.
Adjustable buckle straps fasten apron to legs with adjustable fasteners for
neck and waist. 24” x 48”.
Bib Type – Chrome Tanned Leather – with adjustable web strap at neck and waist.
24” x 42”.
|
|
 |
|
| Replacement Lens / Visors For Blasting
Helmet |
|
| Bullard 20-LC; Adhesive-backed Mylar
lens cover; clear; 13-3/4" x 5-1/4" (25 per package) |
|
 |
|
| Air Line Fittings
|
|
| 1/4” brass fittings for your breathing
air lines. Available in separate parts to suit your convenience. Hose tails
have ribs for the crimp clip to secure onto. Hex Nipples to join your lengths.
On larger diameter and greater flows or pressures . |
|
 |
|
| Whipcheck |
|
| Whipcheck. Designed as a safety device
to prevent hose whip in the event of two hoses becoming uncoupled while under
pressure |
|
 |
|
| Material Handling Hose |
|
| 2" I.D. x 2.40 (in.) O.D. polyurethane
lined, abrasion resistant PVC material handling hose. Black convoluted cover is
made with low temperature HMW PVC compounds for sub-zero flexibility. Ideal
hose for industrial vacuum machines and municipal vacuum inductors. General
Applications: Abrasive material transfer hose. Grain handling. Sand-Shot blast
recovery line. Roof rock cleaning. Fly ash collecting. (For pneumatic system
dry material transfer only). |
|
 |
| |